PRTG Manual: Activate the Product

PRTG automatically activates your license via the internet during the installation process. If PRTG cannot directly connect to the internet and therefore cannot access the activation server, you have to manually activate your license.

i_round_redYou have to complete the product activation process once to use PRTG, otherwise it does not run. Do not forget to activate your commercial license when you want to upgrade your trial or freeware installation.

i_podThis only applies to PRTG on premises installations, not to PRTG hosted by Paessler instances.

Online Activation

Usually, you do not need to manually enter a key after the installation to activate it because PRTG asks for it during the install process. However, there are still scenarios where you need to change your key and activate the respective license. You have to provide your commercial license key, for example, if you have purchased a Commercial Edition and want to upgrade your running Freeware or Trial Edition, or if you upgrade a commercial license to a higher edition.

  1. To enter a new license key, log in to the PRTG web interface.
  2. Select Setup | License from the main menu bar.
  3. Click Change License Key. The Update Your License page appears where you can activate your new license.
  4. Select the activation type Automatic (online activation with optional HTTP proxy) if your PRTG core server can connect to the internet.
    i_round_blueWithout internet access, you have to select Manual (offline activation). The activation process works a bit differently in this case and requires manual interaction.
  5. Provide your license information and click Update License.
  6. PRTG connects to the Paessler activation server via a Secure Sockets Layer (SSL)/Transport Layer Security (TLS) secured connection on port 443 and validates your license.

If everything works fine, you see the message Activation was successful as License Status at the top of the page.

i_square_cyanFor more information, see section Licensing Status and Settings: Update Your License.

i_round_blueThe PRTG core server needs an internet connection on port 443 to activate. If a proxy connection is needed, configure it in step 3 on the Update Your License page. If the activation fails, you can also try an offline activation.

i_podThis option is not available in PRTG hosted by Paessler.

Offline Activation

If no internet connection is available, you have to activate PRTG manually.

i_podThis option is not available in PRTG hosted by Paessler.

  1. In the PRTG web interface, select Setup | License from the main menu bar.
  2. Click Change License Key. The Update Your License page appears where you can activate your license.
  3. Select the activation type Manual (offline activation) if your PRTG core server cannot connect to the internet.
  4. Provide your license information and follow the instructions in step 3 and step 4.
  5. Click Update License.

If the activation was successful, you see the message Activation was successful as License Status at the top of the page.

i_square_cyanFor more information, see section Licensing Status and Settings: Update Your License.

i_round_redIf your PRTG core server is offline, you need to manually activate your license after you renew your maintenance. This ensures that you can install updates, for example. Your maintenance information has to fit the PRTG installer, so you need to activate your license offline before you install an update.

More

i_square_blueKNOWLEDGE BASE

Which servers does PRTG connect to for Software Auto-Update, Activation, etc.?

Installing the Software